彻底解决8139网卡安装完驱动后不认的问题

　　首先要用jsn老兄的方法把你的/etc/hostname.rtls0 以及hosts、/etc/netmasks、/etc/netmasks、/etc/nsswitch.conf设置好。

　　然后注意看8139驱动的说明

　　Install method

　　a. Power-off your PC and insert your RTL8139 adapter.

　　b. Boot-up you Solaris/x86 and login as "root".

　　c. Copy the "rtls099.zip" into the temporary location in your hard-driver.

　　d. UNZIP the "rtls099.zip" and you will get 2 files, "rtls" and "Install".

　　e. If the PCI ID for your RTL8139 adapter is not VID_10EC_DID_8139 or VID_1113_DID_1211 or VID_1186_DID_1301, you can modify the "Install" file to match your PCI ID, VID_ABCD_DID_WXYZ for example, modify the "pci1186,1301" to "pciABCD,WXYZ".

　　f. Run the "Install" from File Manager to install the driver, and

　　it will modify 2 files, "/etc/name_to_major" and "/etc/driver_aliases"

　　g. You need to create the "/etc/hostname.rtls0" file and modify some

　　other related files to make your networking environments working well.

　　h. You can execute "touch /reconfigure" then "shutdown -i5 -g0", so that

　　Solaris will reboot and scan changed

　　hardware environment.

　　i. You can execute "ifconfig -a" to make sure the RTL8139 driver is up.

　　其实这句英文我只有

　　e. If the PCI ID for your RTL8139 adapter is not VID_10EC_DID_8139 or VID_1113_DID_1211 or VID_1186_DID_1301, you can modify the "Install" file to match your PCI ID, VID_ABCD_DID_WXYZ for example, modify the "pci1186,1301" to "pciABCD,WXYZ".

　　f. Run the "Install" from File Manager to install the driver, and

　　it will modify 2 files, "/etc/name_to_major" and "/etc/driver_aliases"

　　这里一开始没看明白我以为没什么用处。但是我大错特错了；（因为这里太重要了。

　　从F.可以知道，安装这个驱动他们会设置/etc/name_to_major和/etc/driver_aliases两个文件。当我们安装完后，需要把/etc/driver_aliases里的

　　rtls "pci1186,1301"

　　rtls "pci10ec,8139"

　　rtls "pci1113,1211"

　　设置为

　　#rtls "pci1186,1301"

　　rtls "pci10ec,8139"

　　#rtls "pci1113,1211"

　　然后重起

　　如果还不好使还有Install里的

　　# update

　　＃ /etc/driver_aliases

　　＃ /etc/name_to_major

　　这个＃去掉。肯定能好使：）

　　good luck！